94 Legend has frond end vibration on acceleration.

Dennis · Guest

I own a 94 Legend 4 door. It has a vibration in the drive train under acceleration. I put on a new set of tires and it help the problem greatly but the vibration is still there. It seems to begin around 40 MPH and is worse at 70 MPH. Is this worn CV Joints or what?

AcuraImport · Site Admin Joined: Mar 11, 2003 Posts: 94

Do you hear a clicking noise when you go around corners? If you do then it is probably your CV Joints. But, i'm gonna go on a limb and guess that your cv joints aren't the problem. When you changed tires did u get a wheel balance and alignment? Aside from that I can think of anything that could be causing your problem.
_________________
If you feel like you're in control, you're not going fast enough. - Mario Andretti

denwilso · Newbie Joined: Jan 07, 2004 Posts: 2

There is no clicking noise anytime. There is no play in the steering or drive train. When I first start up the vibration is hard to detect. After I drive a while the vibration begins and then only under acceleration. There is no pull to right or left when driving down a level road. After purchasing the car I put 10,000 miles on the previous tires with no signs of alignment wear.

Thanks for responding.

TKO · Posted: Thu Jan 08, 2004 10:23 am Post subject:

Do you have any mechanic friends? The reason i ask is b/c almost everytime i ask them a question its always "I couldn't tell you, i'd have to see it." What you are describing is one of those situations where a test drive and equipment check is necessary to give any kind of usefull advise. I could be wrong, but i could think of a million and 1 things that could be causing that. i'll admit it, you got me stumped.

Good luck with that

denwilso · Newbie Joined: Jan 07, 2004 Posts: 2

I'm stumped too. Thanks for replying. What really gets me is that I drove him this evening (30 Miles) and there was no vibration.

lokee · Posted: Fri Feb 13, 2004 4:43 am Post subject: An Idea

I am having the same problem. I think it is the Universal joints. I wanted to get mine check out but I havent had the time. When i get up to about 75 I feel it and when i accelerate it shakes harder. The only thing is that it dosent happen all the time. I think I am going to have it looked at and if that is the problem I will sure let you know.

95Type2Cpe · Newbie Joined: Feb 13, 2004 Posts: 1

Just tagging along as I have the same prob.

Loose and clunky from about 20mph and up, gets worse at highway speeds when warm. Mechanics are having trouble pinning this down. Replaced several "questionable" components (tie-rods ends, ball joints, etc.), but no fix yet. Guess I could always completely rebuild the front end!