Not sure if it works. Good luck.
=========================
Storing transmitter codes:
The codes of up to three transmitters can be read into the keyless
receiver unit memory. (If a fourth code is stored, the code which was
input first will be erased.)
NOTE: It is important to maintain the time limits between the steps.
Make sure the doors and the hatch are closed.
1. Turn the ignition switch ON (II).
2. Within 1 to 4 sec., push the transmitter lock or unlock button with
the transmitter aimed at the receiver under the audio unit.
3. Within 1 to 4 sec., turn the ignition switch OFF.
4. Within 1 to 4 sec., turn the ignition switch ON (II).
5. Within 1 to 4 sec., push the transmitter lock or unlock button with
the transmitter aimed at the receiver under the audio unit.
6. Within 1 to 4 sec., turn the ignition switch OFF.
7. Within 1 to 4 sec., turn the ignition switch ON (II).
8. Within 1 to 4 sec., push the transmitter lock or unlock button with
the transmitter aimed at the receiver under the audio unit.
9. Within 1 to 4 sec., turn the ignition switch OFF.
10. Within 1 to 4 sec., turn the ignition switch ON (II).
11. Within 1 to 4 sec., push the transmitter lock or unlock button
with the transmitter aimed at the receiver under the audio unit.
12. YOU SHOULD NOW HAVE HEARD THE SOUND OF THE DOOR LOCK ACTUATORS!
Within 1 to 4 sec., push the transmitter lock or unlock button again.
13. Within 10 sec., aim any remaining transmitters (up to two
additional ones) whose codes you want to store at the receiver, and
press the transmitter lock or unlock buttons. Confirm that you can
hear the sound of the door lock actuators after each transmitter code
is stored.
14. Turn the ignition switch OFF, and pull out the key.
15. Confirm proper operation of the transmitters. _________________ If you feel like you're in control, you're not going fast enough. ~ Mario Andretti
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
